Initial Setup
- Open Meet Manager and go to Run
- Select Interfaces > Setup > Track Button Timer
- Note: For Cross Country go to CC/RR > Interfaces > Setup
- Select Ultrak L10 and click OK
- Select Interfaces > Track Button Timer - Ultrak L10 > Open/Close Serial Port
- Note: For Cross Country go to CC/RR > Interfaces > CC/RR Button Timer - Ultrak L10 > Open/Close Serial Port
- In Track Button Finish Timer (0-16): field enter correct Port Number and click OK
- Note: For Cross Country enter Port Number in CC/RR Button Timer(0-16) field
- Note: See Open the Correct Port (Timing Console Interface) to select correct Port Number
Importing Results from Ultrak L10 into Meet Manager for Track Events
- Open Meet Manager and go to Run
- Select event and heat
- Click Get Times: F3. List of result files will appear, select correct file
- Open Meet Manager and go to Run
- In the Run the Meet screen go to CC/RR
- In the Cross Country / Road Race Module select Download
- Click Start Download and on the Ultrak L10 press SET/RESULT button
- Once file is downloaded go to Times menu
- In Times menu select Read Times and select the correct .ul2 file
